What is a burl? A burl is a irregular oval growth on a tree trunk or limb that forms when the tree's normal growth is disrupted by an injury, insects, or infection. Inside, the grain folds in on itself, creating dense swirls, clusters of small knots, bark inclusions, and highly variable color. A burl can take decades to reach a size appropriate for turning.
Burl grain doesn't run in lines the way it does in an ordinary board. It swirls, ripples, and gathers into small dark eyes, with pockets of bark and color that can shift from honey to deep brown.
So what is a burl, exactly, and why does the wood inside look the way it does? Below, we cover how burls form, how they differ from knots and galls, and what it takes to turn one into a finished piece in our Hartland, Vermont workshop.
What Is a Burl?
From the outside, a tree burl looks like a rounded swelling on the trunk or a branch. Some are smooth and round, others have irregular lobes and rough bark, and they range from the size of a golf ball to the size of a steamer trunk.
A burl forms when something disrupts a tree's usual growth pattern. The most common triggers are:
- Injury to the trunk or limb
- Insects boring into or feeding on the tree
- Infection by a bacterium, virus, or fungus
The exact mechanism is still not fully understood. Kevin Smith, a plant physiologist with the USDA Forest Service, describes a burl as "a greatly abnormal proliferation of xylem production by the vascular cambium." In plainer terms, the growing layer just under the bark starts producing wood faster, for longer each season, and in irregular directions, instead of laying down neat annual rings.
Burls are also slow. According to Smith, it can easily take 30 to 40 years for a burl to reach a size suitable for turning.
What Does Burl Wood Look Like Inside?
Cut a burl open and the wood is dense, tightly packed, and full of movement. Because the growth went in so many directions at once, the grain folds in on itself. Here is what you will typically see in burl wood:
- Swirling, rippled grain that catches the light differently as you turn the piece
- Eyes, which are clusters of small, dark knots
- Bark inclusions, where bark became enclosed in the wood as the burl grew
- Voids, open pockets or softened areas within the wood
- Highly variable color, within a single piece
No two burls match, and no two pieces from the same burl match exactly. That is why every burl bowl we make is one of a kind.
Burl vs. Knot vs. Gall: What's the Difference?
Burls are easy to confuse with other features on a tree. Here is how the three most common compare:
| Feature | What it is | What the wood is like |
|---|---|---|
| Knot | The base of a branch, enclosed in the trunk as the tree grows | A single dark circle or oval in otherwise straight grain |
| Burl | A hard, woody growth on the trunk or a limb, with no branches or twigs growing from it | Dense, swirling, folded grain throughout the whole mass |
| Gall | Usually a smaller, softer growth, often caused by insects | Often contains rot or insect damage |
The distinction matters to woodworkers. Growths like cankers and galls can look like burls from the outside but often contain rot or insect damage. A true burl in good condition is sound, hard wood.
Why Is Burl Wood So Prized by Woodturners?
Here is the twist: the tangled grain that makes burl beautiful also makes it a poor choice for lumber. The disturbed grain weakens construction material. Burls have limited value as commercial timber, but they are invaluable to wood turners.
On a lathe, a turner can follow the shape of the burl and open up the figure inside, something a sawmill cutting flat boards can't do. We work most often with cherry, maple, and ash burls, and with walnut on occasion.
Burl wood is also prized because a great burl is relatively rare:
- It takes decades to grow. A turnable burl represents 30 years or more of slow, irregular growth.
- The inside is a mystery. There is no way to know what the grain looks like until the burl is cut open.
- Drying is unforgiving. As the dense, irregular grain shrinks, cracks and voids can open, and many pieces break apart before they ever reach a lathe.
How a Burl Becomes a Bowl in Our Hartland Workshop
Where our burls come from
We source our burls from local and regional forests through a network of landowners, foresters, loggers, and landscape companies. We never harvest a tree for its burl. Our burls come from trees that fall naturally or were removed for another purpose.
That matters for the tree as well as the bowl. Cutting a burl from a living tree leaves a large, shallow wound that can let decay set in, according to Smith's research. Working only with trees that are already down puts wood with little commercial value to its best use.
From raw burl to finished piece
Making a burl bowl follows the same path as our Champlain bowls, but with more patience at every step.
- Coring. We start with a section of trunk containing the burl and use the coring machine Andrew designed to cut out rough bowl shapes.
- Drying. The rough bowls dry in our kiln for about four weeks. This is where many burl pieces crack, open up voids, or break apart entirely.
- Turning and finishing. Our turners bring their expertise and artistic eye to each piece, working slowly, often at lower lathe speeds and with specialized mounts and tools. Each finished piece reflects the character of the wood.
We made and sold about 100 burl pieces in 2025, including bowls and decor objects, with critical contributions from the entire Andrew Pearce team.
Three Burls Worth Knowing
A few pieces in our collection show how far a single burl can go.
Ogham. This ash burl was pulled out of the woods in Sharon, Vermont by Andrew and a large tractor. The finished piece measures 6 feet long, 4.5 feet wide, and 3 feet tall, the result of hundreds of hours of carving, sculpting, and sanding. See Ogham.
Killington Peak. An exceptionally large ash burl from a Vermont forester gave us six concentric bowls, growing from 6 inches to 22 inches in diameter. We cored all six from the one burl, dried them for about four weeks, then turned and finished each one. See Killington Peak.
The Grand Canyon. Turned from a Vermont ash burl, this bowl measures 29 inches across and 13.5 inches tall. It took more than 40 hours to complete and is the largest hand-turned bowl to come out of our workshop. See The Grand Canyon.
Bringing a Burl Piece Into Your Home
A burl piece changes the feel of a room on its own. On a dining table, a console, or a mantel, the piece will attract attention throughout the year.
Our burl bowls and decor range from just a few inches to several feet across, and include bowls, vases, lidded boxes, sculptures, and burl trees. With a few oversized exceptions, each burl piece arrives in complimentary gift packaging, which makes burl a natural choice for a milestone like a fifth anniversary.
If you would like to see the grain in person, our burl gallery is in Hartland, Vermont. For a closer look at one species, read our guide to ash burl wood.
Frequently Asked Questions
What causes a burl to grow on a tree?
A burl grows when something disrupts a tree's normal growth, most often an injury, insects, or an infection by a bacterium, virus, or fungus. The tree responds by producing wood rapidly and in irregular directions at that spot. Scientists still don't fully understand the exact mechanism.
Does a burl hurt the tree?
In most cases, no. A burl on its own does not appear to harm a tree or shorten its life. Cutting a burl off a living tree is a different story, because it leaves a large wound that can let decay set in.
What is the difference between a burl and a knot?
A knot is the base of a single branch enclosed in the trunk, and it shows up as one dark circle in otherwise straight grain. A burl is a large growth with no branches coming from it, and the grain throughout the whole mass is dense, swirling, and folded.
Why is burl wood so expensive?
Burl wood takes decades to grow, and there is no way to know what the grain looks like until it is cut open. Many burl pieces crack or break apart while drying, and the ones that survive must be turned slowly with specialized tools. The result is a one-of-a-kind piece that no other burl can reproduce.
What kinds of trees grow burls?
Burls can form on many species, including maple, cherry, ash, walnut, oak, and redwood. At Andrew Pearce Bowls, we work most often with cherry, maple, and ash burls, and with walnut on occasion, all sourced from local and regional forests.
How long does it take a burl to grow?
A burl grows slowly along with the tree. According to USDA Forest Service plant physiologist Kevin Smith, it can easily take 30 to 40 years for a burl to reach a size large enough to turn into a bowl.
The Short Answer
So, what is a burl? It is a tree's response to disruption, growing slowly over decades into some of the most striking wood in the forest. The same tangled grain that makes it a poor fit for lumber is what makes it so beautiful in a finished bowl.
If you'd like to see what our turners have made from it, explore our burl bowls and decor.


